Your snake plant may be getting larger and larger, but you’re probably noticing that the blooms are not quite as abundant as they used to be.
Fortunately, this common problem can be easily remedied by propagating your plant to get new plants that are just as happy in your home as the first one.
Here’s how to propagate your snake plant and keep your house filled with beautiful flowers.
If you want more snake plants, the best way to get them is by propagating your existing plant. Snake plants are easy to propagate from leaf cuttings, and with a little patience, you can have plenty of new plants in no time. Here’s how to do it
The best time to propagate your snake plant is during fall or winter when new growth has stopped and it’s not flowering.
If you don’t have one yet, a snake plant makes a perfect holiday gift for any plant lover on your list. It’s also just a great houseplant because it requires little care once established and is hardy down to 10 degrees Fahrenheit.
There are two ways to propagate your snake plant: via leaf cuttings or division. If you’re looking for faster results, leaf cuttings are your best bet.
Follow these steps and you’ll be well on your way to growing a whole new collection of beautiful snake plants in no time!
- Step 1 – Cut off a healthy leaf: To start your snake plant propagation, cut off a healthy leaf that’s about 2 inches long.
You can do so anytime after your snake plant has stopped growing for that season. Make sure not to include any of the leaf’s veins or petiole, as these parts are important in helping your new plant growth and get established.
- Step 2 – Place cuttings in a vase of water: Place your leaf in a glass or vase full of water and keep it out of direct sunlight. Remember, you’re trying to create conditions as similar as possible to where it came from.
- Step 3 – Cut more leaves: Cut more leaves off your snake plant, following steps 1 and 2. Remember, you want each leaf you cut to be at least 2 inches long and not include any of its veins or petiole.
- Step 4 – Place leaves in water: As you’re cutting your snake plant leaves, place them in a vase of water as you did with your first leaf.
Another option is to propagate snake plants from stem cuttings.
Use a sharp knife or pruning shears to trim healthy stems approximately 6 inches long.
Let them dry overnight before placing them in water until roots develop, which can take anywhere from one month up to two years depending on the variety.
You’ll know they’re ready when you see new growth emerge at each node along the stem, at which point you can report them in a well-draining potting mix.
You can also propagate snake plants by dividing a large clump of existing plants.
However, be careful not to damage or stress existing roots when you do so. As with stem cuttings, let new growth emerge from each node before placing your divided clumps in pots filled with well-draining potting mix.
Be sure to fertilize your snake plant every two weeks during the summer months with a water-soluble houseplant fertilizer diluted by half. When fall arrives, reduce fertilizer applications to once per month. Give your snake plant enough light, but not too much direct sunlight, so it’s shaded from harsh rays.
This is particularly important in hot or dry climates where your snake plant may suffer from scorching if left in direct sun for long periods.
If you want to propagate your snake plant, the best way to do it is by taking a cutting from a healthy leaf. Make sure the cutting has at least two nodes, which are the raised bumps on the stem where leaves attach.
Using a sharp knife or pair of scissors, cut the leaf at a 45-degree angle just below a node. Next, remove the bottom leaf of the cutting if it has one. Once you have your cutting, it’s time to prepare your potting mix.
How to Cut Snake Plant Leaves
Cut leaves from the plant with a sharp knife, making sure to include a small portion of the stem. Place the cuttings in a glass of water, making sure that the leaves are not touching the water.
Put the glass in a bright spot out of direct sunlight and wait for roots to form, which can take up to four weeks. Once roots have formed, you can transplant the cuttings into the soil.
How to Propagate Snake Plant In Water
Start by snipping off a leaf from your snake plant near the base of the plant.
Next, find a clean glass jar and fill it with water. Place the leaf in the water, making sure that the cut end is submerged.
Put the jar in a bright spot but out of direct sunlight. You should see roots growing within 2-4 weeks. Once the roots are about an inch long, you can transplant your new snake plant into a pot with fresh potting soil.
In addition to propagating your snake plant through stem cuttings, you can also propagate by dividing your snake plant.
This method takes a little more time than simply placing a leaf in water, but it’s not difficult.
First, remove one of your snake plants from its pot and gently pull apart some of its roots with your fingers. Make sure that each piece has a few roots attached. Fill new pots with potting soil, then push a few pieces of root into the soil in each one.
ALSO SEE: Does Roundup Kill Trees and Shrubs?
How to Propagate Snake Plant after Root Rot
After your snake plant has root rot, you’ll need to take special care when propagating it.
First, cut off any leaves that are brown or yellow. Next, fill a pot with fresh soil and place the snake plant in it. Water the plant regularly; making sure the soil stays moist but not soggy.
Finally, place the pot in a bright spot out of direct sunlight. With a little love and care, your snake plant will soon be thriving again!
If you’re not quite sure what root rot is, here’s a quick explanation. When your snake plant has root rot, it means that it’s been overwatered or underwater for too long.
As a result, your plant’s roots are rotting away and its leaves are showing signs of yellowing or browning.
Another common cause of root rot is when there’s poor drainage in your potting soil.
Since your snake plant is showing signs of root rot, there’s a good chance you’ll have trouble propagating it.
Don’t worry though; there are ways you can get around that. If you’d like to continue growing your snake plant in a pot, try moving it into fresh soil that drains well. Also, make sure that your plant is getting enough sunlight when it’s outdoors and not underwater.
How Long Does It Take To Propagate Snake Plant In Water?
The time it takes for your snake plant to propagate in water depends on the size of your cutting, the type of container you’re using, and the temperature of your room.
A small cutting in a warm room will take about two weeks, while a large cutting in a cool room can take up to eight weeks.
Snake plants will not propagate in water if they’re exposed to direct sunlight.
Once you’ve moved your cutting from your windowsill into a cup of water, place it in a room with bright indirect light but no direct sunlight.
You can place your cutting in a clear cup or vase, or wrap it in cheesecloth if you want to hide it from view.
If you choose a transparent container, make sure that your cutting gets at least six hours of indirect sunlight per day.
How Often to Water Snake Plant?
Snake plants are pretty drought tolerant, so you don’t have to worry too much about watering them.
It’s better to err on the side of underwatering than overwatering. Allow the soil to dry out completely before giving your plant a good soak. During the growing season (spring and summer), you can water your snake plant every one to two weeks. In the fall and winter, cut back on watering even more, only giving your plant a drink every three to four weeks.
You should also avoid overwatering your snake plant. This is especially important if you keep it in a shallow dish that holds water, as you’ll want to make sure that all of the excess water drains out of its container after watering.
Overwatering can cause your snake plant’s roots to rot, which can be fatal for an indoor plant.
Can You Plant Snake Plant Pups?
Yes, you can propagate snake plants from pups! It’s one of the easiest ways to get more plants. Here’s how to do it
1) Choose a pup that has two or three leaf stems, but isn’t flowering yet.
2) Make a small slit on either side of the stem where it joins with the parent plant using a sharp knife or razor blade.
3) Push the cut end about an inch into fresh potting soil so that the leaves are just above ground level.
4) Water well and keep in an area with bright light until new growth begins. Once new growth is established, move your newly propagated snake plant to its pot.
Give it plenty of sunlight and water whenever the top layer of soil feels dry. These plants are very tough so don’t worry too much about over-watering them – just make sure they’re getting enough moisture.
5) give your new plant about 6 months or so before removing it from its parent plant. At that point, you can then repot it in a bigger pot with fresh soil.
Snake Plant Propagation Problems
Many people struggle with propagating their snake plants, but it doesn’t have to be difficult! Here are a few tips to make sure your snake plant cuttings take root and grow into healthy plants.
- Make sure the cutting has at least two leaves. This will give the plant the energy it needs to grow roots.
- Cut the leaves in half so that they don’t take up too much water. This will help prevent the cutting from rotting before it can grow roots. 3. Take a rooting hormone and dip the bottom of the cutting in it before planting it into potting soil or perlite.
- Keep them well-watered until they start growing new roots – this could take up to three weeks depending on the temperature of your home or office space.
- Once you notice new growth, transplant them outside (or continue propagating!). They’ll need bright light to thrive, so place them near a window.
- Place each plant into its container so they’re easier to care for.
- Water sparingly during the winter months and avoid overwatering during the summer when temperatures soar.
You may also want to consider bringing the plant inside if your house gets too cold in the winter. Be mindful of how much sunlight is reaching where you plan to put it and what types of plants live nearby; some snakes do better with indirect sunlight than others do.
Finally, always keep an eye out for pests like spider mites or aphids. If you find any pests attacking your snake plant, use organic pest control methods like neem oil spray or insecticidal soap to get rid of them. Follow these simple steps to keep your snake plant thriving and happy year-round.
Snake Plant Water Propagation Time Lapse
Water propagation is a great way to propagate your snake plant!
Fill a pot with water and place your snake plant cutting in it. Make sure the leaves are not touching the water. Put the pot in a bright spot out of direct sunlight and wait for roots to form.
This can take anywhere from two weeks to two months. Once you see roots, you can transplant your new snake plant into the soil. Give it a good watering and watch it grow.
Snake Plant Roots above Soil, What to do
If you see your snake plant’s roots above the soil, don’t worry, this is perfectly normal.
It’s a sign that your plant is healthy and ready to propagate. To propagate your snake plant, simply cut off a leaf with a sharp knife or gardening shears.
Make sure the leaf has at least two nodes, which are the raised bumps on the stem where leaves branch out.
Then, place your leaf in a pot with your other snake plants.
To give your new plant a head start, simply take a sharp kitchen knife or sharp pair of scissors and cut off one of its leaves. Make sure that at least two nodes are attached to it; these are small bumps on either side of where a leaf branch out from the stem.